×
Your cart is empty.
Help and Support Please Call - 01202 676 612
Blue Colourmatch 3 x 20g

Blue Colourmatch 3 x 20g

£22.00

A wide range of shades to colour your gelcoat, resin or epoxy. Blue Gee colour charts are available, just go to the ‘downloads’ tab at the top of the page.

Colourmatch kit includes:
3 x 20g pigment pots
3 x mixing stick

This triple 20g pack contains enough pigment to colour about 1200ml of clear gelcoat. These kits are idea for mixing to find an exact colourmatch!

These pigments are designed for use with polyester resin based materials, but have been shown to successfully colour Blue Gee epoxy systems, subject to colour test providing loading does not exceed 5%.

*Always mix resin and hardener before adding pigment.

SKU: 87014 Category:
00000

Complete the look

  • Polyester Clear Gelcoat 0.25kg
    Quickview

    Polyester Clear Gelcoat 0.25kg

    £10.99
  • Clear Gelcoat Kit
    Quickview

    Clear Gelcoat Kit

    £16.00
    Quickview

    Clear Gelcoat Kit

    For a full Gelcoat Repair Guide please download our 'Blue Gee Gelcoat Repair Ebook' [sf_button colour="black" type="standard" size="large" link="/downloads/" target="_self" dropshadow="no" extraclass=""]Download Ebook Here[/sf_button] Our Clear Gelcoat Repair kit is the perfect for colour matching you will just need to choose your 20g Pigment. You can download our colour chart from the download tab across the top bar of our website or just click here. Your can Shop Pigments here. ______________________________________________________________________________________ Guideline Ambient Working Conditions are between 15-20 degrees Celsius with up to 68% humidity. Please note: If working conditions are outside these parameters curing and workable times may vary from the times given. Mixing Ratio: Optimum ambient conditions are between 15-20 degrees Celsius the mix ratio is 2% Catalyst. Temperatures below optimum condition for example 10-15 degrees Celsius mix ratio will increase to 4%. Temperatures above 20 degrees Celsius the mix ratio will decrease 1%. Example 6 drops of Catalyst to 10ml of resin =2% Working Time Guideline: Approximately 10-15 minutes Gel Time Guideline: Gel time is measured from the time the gelcoat has been applied to when it has cured enough so that it does not pull off when touched, but isn’t fully cured and is optimum for putting a second coat on. Gel time = Approximately 30 minutes - 1 hour Ambient Cure Guideline Approximately 8-12 hours For additional support and information contact Blue Gee Technical Team on tel: 01202 676612 email: technical@bluegee.co.uk
    £16.00
  • Polyester Clear Gelcoat 1kg
    Quickview

    Polyester Clear Gelcoat 1kg

    £29.99
    Quickview

    Polyester Clear Gelcoat 1kg

    £29.99
  • Colourmatch Mix/Store Kit
    Quickview

    Colourmatch Mix/Store Kit

    £5.99
    Quickview

    Colourmatch Mix/Store Kit

    £5.99