Your cart is empty.
×
Your cart is empty.
Help and Support Call - 01202 676 612 // FREE Delivery on Orders over £35
Peelaway® Marine Antifouling Remover Sample Pot

Peelaway® Marine Antifouling Remover Sample Pot

£12.50 £10.00

Peelaway® Marine Antifouling Remover is specially formulated to effectively remove multiple layers of anti-foul coatings with one application saving time by reducing the need for repeated scraping.

Its patented water based poultice system means the product remains active and works without rapidly drying out. The special poultice blanket supplied enables stripped anti-foul paint to be collected easily and so reduces boatyard/dockside contamination risk.

The light paste consistency and is easy to apply to vertical surfaces and difficult shapes. It can be applied with a brush or trowel and for larger areas an airless sprayer can be used. Always carry out a test patch before general application. Suitable for most hull types including GRP, wood, steel and concrete.

Category:
00000

Complete the look

  • Off White Colourmatch 3 x 20g
    Quickview

    Off White Colourmatch 3 x 20g

    £22.00
    Quickview

    Off White Colourmatch 3 x 20g

    £22.00
  • Clear Gelcoat Kit
    Quickview

    Clear Gelcoat Kit

    £15.99
    Quickview

    Clear Gelcoat Kit

    For a full Gelcoat Repair Guide please download our 'Blue Gee Gelcoat Repair Ebook' [sf_button colour="black" type="standard" size="large" link="/downloads/" target="_self" dropshadow="no" extraclass=""]Download Ebook Here[/sf_button] Our Clear Gelcoat Repair kit is the perfect for colour matching you will just need to choose your 20g Pigment. You can download our colour chart from the download tab across the top bar of our website or just click here. Your can Shop Pigments here. ______________________________________________________________________________________ Guideline Ambient Working Conditions are between 15-20 degrees Celsius with up to 68% humidity. Please note: If working conditions are outside these parameters curing and workable times may vary from the times given. Mixing Ratio: Optimum ambient conditions are between 15-20 degrees Celsius the mix ratio is 2% Catalyst. Temperatures below optimum condition for example 10-15 degrees Celsius mix ratio will increase to 4%. Temperatures above 20 degrees Celsius the mix ratio will decrease 1%. Example 6 drops of Catalyst to 10ml of resin =2% Working Time Guideline: Approximately 10-15 minutes Gel Time Guideline: Gel time is measured from the time the gelcoat has been applied to when it has cured enough so that it does not pull off when touched, but isn’t fully cured and is optimum for putting a second coat on. Gel time = Approximately 30 minutes - 1 hour Ambient Cure Guideline Approximately 8-12 hours For additional support and information contact Blue Gee Technical Team on tel: 01202 676612 email: technical@bluegee.co.uk
    £15.99
  • White Gelcoat Kit
    Quickview

    White Gelcoat Kit

    £15.99
    Quickview

    White Gelcoat Kit

    For a full Gelcoat Repair Guide please download our 'Blue Gee Gelcoat Repair Ebook' [sf_button colour="black" type="standard" size="large" link="/downloads/" target="_self" dropshadow="no" extraclass=""]Download Ebook Here[/sf_button] ______________________________________________________________________________________ Guideline Ambient Working Conditions are between 15-20 degrees Celsius with up to 68% humidity. Please note: If working conditions are outside these parameters curing and workable times may vary from the times given. Mixing Ratio: Optimum ambient conditions are between 15-20 degrees Celsius the mix ratio is 2% Catalyst. Temperatures below optimum condition for example 10-15 degrees Celsius mix ratio will increase to 4%. Temperatures above 20 degrees Celsius the mix ratio will decrease 1%. Example 6 drops of Catalyst to 10ml of resin =2% Working Time Guideline: Approximately 10-15 minutes Gel Time Guideline: Gel time is measured from the time the gelcoat has been applied to when it has cured enough so that it does not pull off when touched, but isn’t fully cured and is optimum for putting a second coat on. Gel time = Approximately 30 minutes - 1 hour Ambient Cure Guideline Approximately 8-12 hours For additional support and information contact Blue Gee Technical Team on tel: 01202 676612 email: technical@bluegee.co.uk
    £15.99